800-423-2446M - F / 8am to 8pm
Products OEMS

Custom Heater Wire

FIBERGLASS BRAID
RHS PART #64-200

The most popular wire for reach-in freezers and refrigerators. This wire is normally installed behind door mullions with foil backing tape.

64-200 wire is constructed of a helically wound element on a fiberglass core, insulated with 1/32" of silicone rubber and covered with a fiberglass braid. 64-200 series are usually fabricated in circuits 6 ft. to 30 ft. long. Wire is 1/8" diameter.

ALUMINUM BRAID
RHS PART #64-250

A durable, abrasion resistant wire with aluminum outer braid that aids in heat transfer. In all other respects it is constructed the same as 64-200 Series wire. Normally used around walk-in door openings in circuits 15 ft. to 60 ft. long. Typically installed in double wraps around door openings.

NOTE: 64-250 wire is thicker in diameter than 64-200. This style of wire is approximately 3/16" diameter.

Create Your Custom Heater Wire Circuit

1
Type Of Heater Wire:
 
Price Per
Foot:
2
Voltage:
3
Holding Temp
Of Box (F°):
4
Total Length: (Inches)
NOTE: RHS adds 18" of non-heated lead wire
to your total circuit length. Lead wire may
be cut for installation purposes.
5
Number Of Wraps:
NOTE: This value will only affect the wattage output (per foot) of the wire.
It has no bearing on your total length value.
6
Quantity:
 
Total Feet
 
Total Price
7
= Required Field
NOTE: Please carefully check your order.
All custom orders are non-returnable.

These are not self-regulating heaters. Do NOT cut the heater wire,
as this will cause the circuit to short out. (18" lead wire may be cut, but not heater wire)

RHS does offer heater wire circuits up to 1,200" in length. Please call for details.
             
#

Line Item Add

Item Number:
Quantity:
Unit of Measure: